---
catalog: FSH24R
catalog_name: Frameless Shower Door Hardware & Supplies
page: 40
sku_count: 1
skus:
  - "VALF1"
bases:
  - "VALF1"
generated_at: "2026-05-21T23:30:06Z"
---

# Frameless Shower Door Hardware & Supplies -- Page 40

This page features 1 products:

`VALF1`

## Page Content

P.O. Box 1906 South Gate, CA 90280
Toll Free: (888) 295-4531  |  Direct: (323) 968-2031
Fax: (323) 336-8307  |  fhc-usa.com
FRAMELESS SHOWER DOOR HINGES
SECTION 1
Cut-Out Required: Specific 
Cut-Out Templates Available 
at fhc-usa.com.
Includes: Hinge, Glazing 
Gaskets, Wall Mounting 
Screws, Allen Head/Phillips 
Head Cover Plate Screws, 
and Fabrication Template.
MAXIMUM DOOR  
CAPACITY
3/8" (10 mm) GLASS 
Approx. 5 lb/ft2
1/2" (12 mm) GLASS 
Approx. 6.4 lb/ft2
DOOR WEIGHT
DOOR WIDTH
USING 2 HINGES
145 LBS. (65 kg)
40" (1016 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
MAXIMUM CAPACITY:
- For 3/8” to 1/2” Tempered Glass
- For Heavier and Wider Doors,
Maximum 145 Pound Rating
- Square Profile Wall Mount and
180 Degree Glass-to-Glass Models
- Seven Popular Finishes
- Self-Centering Within 15 Degrees
of Closing Position
- Solid Brass Construction
- Commonly Used in Residential Bath
and Commercial Hotel Applications
Valore HD
Heavy-Duty Frameless 
Shower Door Hinges
NOTE: Dimensions  
Shown are Similar for All 
Valore HD Series Hinges.
T H E  G L A Z I N G  S U P P L Y  C O M P A N Y
FRAMELESS HARDWARE COMPANY
FRAMELESS HARDWARE COMPANY              2323 Firestone Blvd. South Gate, CA 90280     Toll Free: (888) 295-4531   |   Fax: 323 336-8307   |   Web: fhc-usa.com
SHOWER HINGE TEMPLATE
PROFESSIONAL GRADE
40"
MAX 
WIDTH
2-HINGES
SEE TEMPLATE ON BACK
Refer to Dimensions Shown 
to Ensure Accuracy
MAX
145
LBS
CARE & CLEANING GUIDELINES:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. 
Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh 
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will  
become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning  
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely 
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,  
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware. 
MAINTENANCE:
FHC’s hinges come factory greased for a silent, hassle-free experience.  
If there is any noticeable squeaking that occurs after installation it is recommended  
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot  
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning  
grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge  
is disassembled during maintenance, use a small amount of white lithium grease  
to lubricate the interior hinge components.    
VALORE HD 
Wall Mount  Hinge
ITEM NO. VALF1
SPECIFICATIONS
Glass Sizes: 3/8" or 1/2" (10 or 12 mm) Tempered Glass Only
Construction: Solid Brass
Closing T

*(truncated, 5,856 chars total)*