---
sku: P1VPN38
name: FHC Pivot Pin for 3/8\" Glass
product_group: shower
d3_group: 02
d3_class: 2C
url_key: p1vpn38
url: "https://fhc-usa.com/p1vpn38"
image: "https://fhc-usa.com/media/catalog/product/p/1/p1vpn38-prod-1_2.jpg"
variants:
  -
    sku: P1VPN38
    label: Base
  -
    sku: P1VPN38S
    suffix: S
    type: unknown
    label: Variant (S)
catalog_refs:
  -
    catalog: FSH24R
    pages:
      - "44"
      - "50"
      - "59"
co_page_skus:
  - "AL6X12"
  - "AL6X15"
  - "GMT"
  - "P1VPN12"
  - "PL6X12"
  - "PL6X15"
  - "PS102"
  - "PS103"
  - "PS122"
  - "PS123"
operational:
  lead_time_days: 90
  uom: ST
  cuttable: false
  country_of_manufacture: CHINA
  backorder: true
  make_buy: Buy
related_skus:
  - "AL6X15"
  - "PL6X15"
  - "PAT01"
  - "PAT06"
generated_at: "2026-05-21T23:29:36Z"
---

# FHC Pivot Pin for 3/8" Glass

The FHC Pivot Pin for 3/8" Glass is part of FHC's shower hardware line. Featured in our Frameless Shower Door Hardware & Supplies (pages 44, 50, 59).

## Description

Overview FHC's 5 degree Pivot Pin sets are designed to allow an additional 5 degrees of closing for jobs that require a firmer positive position against a jamb or seal. These Pivot Pins are installed prior to installation of the hinge onto the glass. Care & Cleaning Guidelines For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware. Maintenance FHC's pivot pin sets come factory ready for a silent, hassle-free experience. If there is any noticeable squeaking that occurs after installation it is recommended to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge is disassembled during maintenance, use a small amount of white lithium grease to lubricate the interior hinge components. Material/Construction Stainless Steel

## Available Variants

| SKU | Variant | Type |
|-----|---------|------|
| P1VPN38 | Base | base |
| P1VPN38S | Variant (S) | unknown |

## Featured in Catalogs

- **FSH24R** (Frameless Shower Door Hardware & Supplies): pages 44, 50, 59

## Product Details

- Lead time: 90 days
- Unit of measure: ST
- Country of manufacture: CHINA

## Related Products in Catalog

Often shown alongside this product:
`AL6X12`, `AL6X15`, `GMT`, `P1VPN12`, `PL6X12`, `PL6X15`, `PS102`, `PS103`, `PS122`, `PS123`