---
sku: VALF1
name: FHC Valore HD Series Wall Mount Hinge - Full Back Plate
product_group: shower
url_key: valf1
url: "https://fhc-usa.com/valf1"
image: "https://fhc-usa.com/media/catalog/product/_/v/_v_a_valf1bn-1w_4_1.jpg"
variants:
  -
    sku: VALF1
    label: Base
  -
    sku: VALF10RB
    suffix: 0RB
    type: finish
    label: Oil Rubbed Bronze
  -
    sku: VALF1BBRZ
    suffix: BBRZ
    type: finish
    label: Brushed Bronze
  -
    sku: VALF1BN
    suffix: BN
    type: finish
    label: Brushed Nickel
  -
    sku: VALF1CH
    suffix: CH
    type: finish
    label: Polished Chrome
  -
    sku: VALF1MB
    suffix: MB
    type: finish
    label: Matte Black
  -
    sku: VALF1PN
    suffix: PN
    type: finish
    label: Polished Nickel
  -
    sku: VALF1SB
    suffix: SB
    type: finish
    label: Satin Brass
catalog_refs:
  -
    catalog: FSH24R
    pages:
      - "40"
related_skus:
  - "VENF1"
  - "SUCD38"
  - "PHSQ8X8"
  - "GLENF1"
generated_at: "2026-05-21T23:29:33Z"
---

# FHC Valore HD Series Wall Mount Hinge - Full Back Plate

The FHC Valore HD Series Wall Mount Hinge - Full Back Plate is part of FHC's shower hardware line. Available in 7 finishes including Oil Rubbed Bronze, Brushed Bronze, Brushed Nickel. Featured in our Frameless Shower Door Hardware & Supplies (page 40).

## Description

Glass Specifications MAXIMUM DOOR CAPACITY 3/8" (10 mm) GLASS Approx. 5 lb./ft² 1/2" (12 mm) GLASS Approx. 6.4 lb./ft² DOOR WEIGHT DOOR WIDTH Using 2 Hinges 145 LBS (50 kg) 40" (914 mm) NOTE: Do Not Exceed either maximum weight or width when choosing proper quantity of hinges. Gasket Specifications For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side. For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side Glass Instructions Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges. Overview The Valore Series hinge has a dual degree pivot pin. It comes factory set at 90 degrees for normal door closing applications. There is also a secondary setting on the hinge pivot pin that can be field adjusted to allow an additional 5 degrees of closing for jobs that require a firmer positive position against a jamb or seal. Care and Cleaning Guidelines For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware. Maintenance FHC™s hinges come factory greased for a silent, hassle-free experience. If there is any noticeable squeaking that occurs after installation it is recommended to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge is disassembled during maintenance, use a small amount of white lithium grease to lubricate the interior hinge components. WARNING: Cancer and Reproductive Harm. Learn More P65Warnings.ca.gov

## Available Variants

| SKU | Variant | Type |
|-----|---------|------|
| VALF1 | Base | base |
| VALF10RB | Oil Rubbed Bronze | finish |
| VALF1BBRZ | Brushed Bronze | finish |
| VALF1BN | Brushed Nickel | finish |
| VALF1CH | Polished Chrome | finish |
| VALF1MB | Matte Black | finish |
| VALF1PN | Polished Nickel | finish |
| VALF1SB | Satin Brass | finish |

## Featured in Catalogs

- **FSH24R** (Frameless Shower Door Hardware & Supplies): page 40